miércoles, 30 de abril de 2014

Mapping


Para aquellos a quienes os gusta mirar mapas de Barcelona, os enlazamos a la página web de bigtimebcn.300000kms. Este trabajo urbanístico, que indica de cada parcela de Barcelona cuando fue construido, da para muchas lecturas y para mucha información concreta y directa. El resultado es un mapa precioso que puede ser desde una herramienta muy útil para profesionales hasta una divertimiento para turistas... todos quisiéramos llegar a un público tan amplio.

martes, 29 de abril de 2014

Imprimiendo viviendas

Winsun New Materials

Hace unos días se hizo público el trabajo que ha llevado a cabo la empresa de construcción Winsun New Materials, ubicada en Suzhou, China. Esta empresa ha conseguido en 24h, mediante una impresora 3D (de 150x10x6,6m) y la combinación de materiales reciclados y otros como la fibra de vidrio y el cemento, la producción de diferentes componentes constructivos para la construcción de 10 casas. Uno de los responsables de la empresa china, Ma Yihe, estima que el coste de impresión de estas casas es aproximadamente la mitad en comparación  con un sistema tradicional de construcción.

Sin entrar en la idoneidad del sistema  o en si es factible o aplicable en condiciones reales, hay que decir que la idea inicial de poder prefabricar una serie de elementos para su posterior ensamblaje en obra representa un nuevo concepto de construcción, un concepto basado en la eficiencia y optimización de los recursos para, posteriormente, obtener un producto (en este caso edificio) con las mejores prestaciones posibles.


Desde B01 Arquitectes apoyamos este tipo de iniciativas dentro del mundo empresarial de la construcción ya que, en mayor o menor medida, ayudan a dar un empujón más al sector y de esta manera mejorar los sistemas constructivos actuales.

lunes, 28 de abril de 2014

The Context of Sustainable Architecture


Arquitectura sostenible puede fallar mucho, si detrás del proyecto concreto no hay una idea general y coherente de lo que es la sostenibilidad. El fenómeno es complejo y no acaba con la arquitectura en sí. Por esto hemos, encargado por la asociación AxA y patrocinado por la empresa ROCA, organizado un seminar, THE CONTEXT OF SUSTAINABLE ARCHITECTURE.
A través de una introducción, cuatro conversaciones (sobre publicidad, energía, re-utilización y economía) y un debate y conclusiones finales, pretendemos asentar la arquitectura otra vez en en centro del debate social, tratando la sostenibilidad con rigor, con franqueza y sin prejuicios, escuchando a un grupo de ponentes internacionales, moderado por Sander Laudy.
Las sesiones, en Inglés, serán gratis y os invitamos a todos a ROCA Gallery los días 28 y 29 de mayo (plazas limitadas). 

martes, 15 de abril de 2014

Low energy MZ house

Take a decaying house of 1900, trapped in its city block, awfully oriented, and refurbish it while maintaining the original façade and volume: challenge accepted!


Low energy MZ House is the result of a neat and effective intervention by the architect/owner Marc Folch in the district of Sarrià, Barcelona. The architects' goal was to reach the Passivhaus standard with a quick and cheap work. The project consists in a wooden prefabricated dry construction chiseled with numerical control and assembled on site in only two days. The construction process was very accurate with a particular attention to ensure enough aritightness. The interior finishing is a well balanced mix of wood and plastering surfaces. Inside the walls run the pipes of the mechanical ventilation circuit that constantly refreshes the inside air with a heat recovery efficiency of 92%. The plan distribution is a total open space that enhance the perception of a large room besides the small plot area but, on the other hand, it doesn't always ensure enough privacy which could result essential in case of a family with children.
The project was mainly developed in section providing the continuity of the volume whith a full height space covered with a skylight. This design strategy was thought to get at once natural ventilation, daylight and passive solar heating, significantly reducing energy consumption and improving comfort.
The result is extraordinary even if the house didn't reach the passivhaus standard. The energy consumption for heating passed from 170 kwh/m2 to just 17 kwh/m2 a year. Nevertheless this strategy was probably not exploited at the maximum of its possibility due to a lack of accuracy in its study: The skylight could cause overheating in summer and may not be sufficient for passive heating in winter due to the obstruction that the same building casts to itself. The open space doesn't play in favor of the climate control: when the heating or cooling needs to be activate it will always heat the totality of the volume. The construction doesn't offer a good thermal inertia therefore the house is more vulnerable to the in/out difference of temperature both in summer and in winter. Probably the initial choice to aim at the passivhaus standard was not the correct one; the big effort of making the house as much airtight as possible was neiter successful nor 100% profitable. 
However it is a good example of sustainable architecture which must be kept in mind whenever an architect approaches a refurbishment project.